1. When installing, location selection is the key. Solar panels should be installed in an unobstructed, well-lit area, preferably with at least 6 hours of direct sunlight per day. The installation height of the pump should be determined according to the depth of the water source and the water demand, and it should not be too deep from the water surface to avoid increasing the burden of pumping. The selection of pipes should match the flow rate and pressure of the pump, and the interface should be tightly sealed to prevent water leakage. After the installation is completed, be sure to check whether the parts are firmly connected and whether the circuit is normal.

 

2. Maintenance work should not be ignored. If conditions permit, please clean the dust and debris on the surface of the solar panel frequently to improve the efficiency of light energy conversion. Check the impeller of the pump every month for foreign matter blockage and whether the bearing is running flexibly. Check whether the pipeline is damaged or aging every quarter, and replace the problematic parts in time.

 

3. In winter, when the water pump is not in use, the water stored in the pump and pipeline should be emptied to prevent freezing damage. When the temperature is high in summer, pay attention to heat dissipation for the control box and other electrical components where the controller is stored to avoid overheating failure.

 

4. In addition, it is recommended to conduct a comprehensive inspection and maintenance of the solar water pump regularly, record the operation data, and find potential problems in time.

By following these tips, your solar water pump will continue to operate efficiently and stably, providing reliable water security for your production and life, and enjoying the convenience brought by green energy. 

DIFFUL is an innovative and technology-leading manufacturer of solar pumps, specializing in DC solar pumps, AC/DC hybrid solar pumps, and shielded motor solar pumps. Since our establishment in 1989, we have maintained a 100% focus on this industry, with hundreds of thousands of our pumps in use worldwide. Our commitment to quality is evident through the use of high-precision and fully automatic processing machines, advanced assembly lines, and testing equipment to enhance efficiency and ensure top-notch products. Furthermore, we have established our own controller production and research and development workshop, guaranteeing that every step of the production process is meticulously controlled. We are actively seeking Distributors and offer support for OEM partnerships. If there are any further discussions or details that need to be addressed, please feel free to contact us. We appreciate your attention and trust.

E-mail:sales08..........com

Tel/WhatsApp:+86 15058288607