Search This Supplers Products:PUMPAC/DC SOLAR PUMPDC SOLAR PUMPSURFACE PUMPSUBMERSIBLE PUMPPOOL PUMP
DIFFUL Solar Pump Accessories | Solar Pump Controller | Solar Pump Body | Solar Pump Motor | Solar Pump Impeller
- group name
- SOLAR WATER PUMP ACCESSORIES
- Min Order
- 1 piece
- brand name
- DIFFUL
- Nearest port for product export
- NINGBO, SHANGHAI
- Delivery clauses under the trade mode
- FOB, CFR, CIF, EXW
- Acceptable payment methods
- T/T, L/C, D/P D/A, MoneyGram, Credit Card, PayPal, Cash
- update time
- Thu, 21 Nov 2024 16:29:31 GMT
Paramtents
Type Solar pump accessories
Material Stainless steel, Plastic, Brass
Package type Carton
Certificate CE, ISO9001
Application Solar Pump Repair
Packging & Delivery
-
Min Order1 piece
Briefing
Get the most out of your Difful solar pump investment by adding accessories that extend the life of your solar pump system.
Detailed
Solar Water Pump Accessories
Get the most out of your Difful solar pump investment by adding on accessories that extend the life and ease of use of your solar pump system. Here you can shop new or replacement motors, pump bodies, controllers, float switches, and even controller PCB. While most accessories aren't required, they are highly recommended. Find the accessories to improve your solar pump system and contact us with any questions you may have.
Solar Pump Controller
(1)Waterproof grade: IP65
(2)Ambient temperature: -15℃~60℃
(3) Max. input current: 17A
(4)MPPT function, the solar power utilization rate is higher.
(5)LED displays the working condition: power, voltage, current, speed, etc
(6)It can automatically adjust the speed for operation according to the sunlight power, and can also manually adjust the speed for operation according to actual demand.
(7)Automatic startup and shutdown, without personnel on duty.
(8)Soft start: No impulse current, protect the pump motor.
(9)Over-voltage/undervoltage/over-current/phase loss/short circuit/water shortage/
high temperature protection etc.
Solar Pump Monitor
1. IP65
2. Intelligent display
3. Three operating modes: automatic mode, AC mode, DC mode.
4. Water level control and pressure control (with electronic float switch and pressure switch)
5. Low power or low flow judgment (with flow switch)
6. Auto-start function while power-on
7. Time switch function
8. AC and DC power supply timing switching function
9. Auto start generator function (with Gen signal relay)
10. Overcurrent/overvoltage protection function
11. Automatically identify whether the AC terminal is connected to DC or AC power supply, and calculate and judge respectively overvoltage and undervoltage .
Solar Pump Motor
The motor in the solar water pump is a key component that converts solar energy into mechanical energy. It converts solar energy into electrical energy, then converts electrical energy into mechanical energy, and finally drives the pump to work. When the motor is running, it will generate a certain amount of heat, and the motor will run within the normal operating temperature range to ensure the normal operation of the solar water pump.
Solar Pump Body
The pump body contains the outlet, the connections, and the impeller inside. When the pump body is aging, or its parts are damaged or worn, but it is not clear how to disassemble it, it is a smart choice to directly replace the pump body.
Replacing the pump body can more effectively improve the service life of the water pump; improve the operation of the water pump, reduce the friction of the water pump, and reduce the noise; improve the overall structure of the solar water pump, making the water pump more stable, reliable, and safer.
Solar Pump NSK Bearing
Japanese Brand NSK bearings, low noise, high quality, longer service life
1. Bearings are mainly used for supporting shafts, rotating shafts, as well as supporting bearing housings and other components to ensure the normal operation of the water pump.
2. It can resist the vibration and shock generated by the water pump to ensure the normal operation of the water pump.
3. It can effectively reduce the friction of the water pump and reduce the energy consumption of the water pump.
4. It can improve the efficiency of the water pump and improve the working effect of the water pump.
Solar Pump Rotor
The whole 304 stainless steel rotor shaft avoids the risk of broken shaft
Embedded with silicon steel sheets, it runs smoothly
The magnet is made of 40SH aluminum-iron-boron material, and the magnet temperature resistance is 150°C
The solar water pump rotor is used to convert solar energy into mechanical energy to drive the water pump, draw water from the water source, and deliver the water pumped out to the corresponding place.
Solar Pump Mechanical Seal
Silicon carbide impregnated graphite mechanical seal, anti-leakage, wear-resistant, long service life, reliable operation
Mechanical seals are used to prevent the leakage of liquid inside the pump and the entry of outside air and pollutants into the pump interior. In addition, the mechanical seal can also improve the efficiency of the water pump and prolong its service life.
Solar Pump Impeller
The impeller in a solar water pump plays an important role in converting kinetic energy into fluid kinetic energy. Its main function is to convert the rotational energy of the motor into the output kinetic energy of the pump, so that the output flow of the pump reaches a predetermined value. The shape of the blade of the impeller, the speed of the impeller and the diameter of the impeller will all affect the performance of the pump. Therefore, the design of the impeller is the key to the pump.
Float Switch For Solar Pump
The float switch is mainly used to control the automatic start and stop of the water pump. When the water level is lower than the set water level of the float, the float will fall, trigger the switch, and start the pump. When the water level rises to the set water level of the float, the float will ascend, trigger the switch, shut off the water pump. It can be used to control the water level of water towers, ponds and swimming pools, etc.
Solar Pump Controller Circuit Board
The function of the solar water pump controller circuit board is mainly used to control the work of the solar water pump. It can automatically adjust the working state of the water pump according to the change of solar energy, thereby saving energy. It can also control the start and stop of the water pump, monitor the running status of the water pump, and automatically adjust the speed of the water pump according to the needs of users.
Reasons why you might want to replace a circuit board include:
1. The circuit board is faulty and cannot work normally.
2. Due to the change of the parameters of the solar water pump, the original circuit board cannot meet the new parameters and needs to be replaced.
3. Update more efficient circuit boards to improve the efficiency of solar water pumps.
4. Replace the more durable circuit board to prolong the service life of the solar water pump.
Solar Pump Controller MOS
The function of the MOS tube in the solar water pump controller is to control the working state of the water pump. It can control the start and stop of the water pump, and is the core device on the controller circuit.
Solar Pump Controller Chip
Functions of the chip in the controller mainly includes:
1. Realize the control of solar water pump: the chip can control the running state of the water pump according to the voltage and current of the solar panel to achieve the purpose of energy saving.
2. Detect the running state of the water pump: the chip can detect the running state of the water pump, such as the pressure, flow, temperature, etc. of the water pump, so as to find faults in time and ensure the safe operation of the water pump.
3. Protect the water pump: the chip can realize the protection functions of the water pump such as overload, short circuit and over temperature, so as to prevent the water pump from being damaged due to overload.
4. Intelligent control: The chip can realize automatic control and automatically adjust the running state of the water pump to achieve the best energy-saving effect.